Aluminium-Free Deodorant Manufacturing: Formula and Claims

Aluminium-Free Deodorant Manufacturing: Formula and Claims

20/10/2026

5

Jorit Tessmann

Jorit Tessmann

CEO & Founder at Labtree GmbH

A deodorant without aluminium salts requires a completely different mode of action than an antiperspirant. Anyone fighting odour rather than sweat production has to align alternative active ingredients, the right product format and legally sound claims from the very start of formulation development.

The topic is short and compact

Antiperspirants use aluminium salts to reduce sweating, while deodorants only combat odour.

Regulation (EU) 2026/909 limits aluminium in non-aerosol deodorants to 7.73 percent.

Advertising claims such as "aluminium-free" must not disparage safe and approved ingredients.

Alternative deodorant active ingredients such as zinc ricinoleate or baking soda must be precisely tailored to formats like sticks or creams.

So lรคuft die Entwicklung bei Labtree

1

Konzeptionierung

2

Bemusterung โ€“ Standardmuster in 24 h

3

Individualisierung

4

Prototyping

5

Produktion

White Label 2โ€“3 Monate ยท Private Label 3โ€“6 Monate ยท Produktion ab 1.000 Stรผck

Deodorant or antiperspirant: What should the product do?

An aluminium-free deodorant is a deodorant in the strict sense: it does not inhibit sweat production, but targets odour. Antiperspirants contain aluminium salts that close the pores and thereby inhibit sweat production; deodorants contain no aluminium compounds and work via fragrances and antibacterial active ingredients. This distinction is the first product decision, because it determines the active ingredient system, format, packaging and the claim the brand can later make.

For brands entering cosmetics from a lifestyle or wellness background, the temptation is to promise both: fresh and dry. A product without aluminium salts cannot technically deliver the dryness promise of an antiperspirant. Under the truthfulness criterion (criterion 5) of Regulation (EU) No 655/2013, advertising claims must be objective and must not denigrate competitors or lawfully used ingredients. The performance promise must therefore match the working principle from the outset.

Characteristic

Deodorant

Antiperspirant

Aluminium salts

No

Yes

Working principle

Antibacterial and odour-masking

Pore closure inhibits sweat production

Sweat volume

Unchanged

Inhibited

Typical formats

Stick, roll-on, cream

Roll-on, stick, aerosol

Anyone who decides early on for odour protection rather than sweat protection avoids later rework on formulation and labelling. The path to launching a cosmetics brand can be structured so that concept, formulation and claim fit together from the start (launching a cosmetics brand).

What applies to aluminium in deodorants from 2026?

In its opinion SCCS/1662/23 of March 2024, the Scientific Committee on Consumer Safety (SCCS) assessed aluminium compounds in cosmetic products as safe up to the maximum levels it specified. At the same time, the Committee notes that total exposure from cosmetics and food can exceed safe limits for consumers with the highest exposure. Aluminium is therefore neither banned nor classified as unsafe.

Regulation (EU) 2026/909 of 27 April 2026 incorporates this assessment into Annex III of Regulation (EC) No 1223/2009 and, for the first time, sets binding maximum levels for aluminium-containing ingredients in deodorants and antiperspirants. For non-aerosolised products the limit is 7.73 percent (as aluminium), for aerosols 3.24 percent. Products exceeding these values may no longer be placed on the market from 1 January 2027 and may no longer be made available from 1 July 2028.

Product type

Maximum level (as Al)

Transition periods

Non-aerosol deodorant and antiperspirant

7.73 %

No placing on the market from 1 January 2027, no making available from 1 July 2028

Aerosol deodorant and antiperspirant

3.24 %

No placing on the market from 1 January 2027, no making available from 1 July 2028

For brands, the limit creates legal certainty and at the same time strengthens the segment of aluminium-free alternatives, which now stands out on a clearly regulated market. Important for positioning: since aluminium salts remain approved and are assessed as safe within the limits, waiving them cannot be a safety argument. The obligations under the EU Cosmetics Regulation, from the responsible person to the product information file, apply to an aluminium-free deodorant just as to any other product.

May a deodorant advertise as "aluminium-free"?

Yes, but only under conditions. Regulation (EU) No 655/2013 sets out six common criteria that every advertising claim must meet: legal compliance, truthfulness, evidential support, honesty, fairness and informed decision-making. Free-from claims such as "aluminium-free" are permissible under these criteria if they are truthful and substantiated and enable the consumer to make an informed purchase decision.

  • Truth: The product contains no aluminium compound, including no alum.

  • Verifiability: The absence can be demonstrated on the basis of the formulation documentation and the raw material specifications.

  • Honesty: The claim makes no safety promise and implies no health risks in other products.

  • Fairness: Legally permitted ingredients are not disparaged, as required by criterion 5 (truthfulness) of the annex to Regulation (EU) No 655/2013.

  • Informed decision: The claim addresses buyers who avoid aluminium for personal reasons.

Which active ingredients replace aluminium salts in deodorant?

Without aluminium salts, the mode of action shifts from pore blocking to odour formation itself. Sodium bicarbonate (baking soda) acts antimicrobially against the bacteria that convert sweat into odorous substances. Zinc ricinoleate, by contrast, binds odour molecules as they form instead of attacking the bacterial flora, and is therefore considered particularly skin-friendly. Acidifying agents such as triethyl citrate lower the pH of the underarm skin locally, making it harder for odour-forming bacteria to grow. Fragrances provide additional masking, but they do not replace any of the other mechanisms.

Skin compatibility must be factored into the selection: an underarm flora that is suppressed too strongly can make the skin more susceptible to recolonisation, as dermatological reviews show. The concentration and combination of active ingredients should therefore be tested for tolerability during formulation development, not only for efficacy.

Stick, roll-on or cream: which format stays stable?

The format determines whether the active ingredient actually delivers its effect in the product. Baking soda incorporates well into fat- and wax-based sticks, while zinc ricinoleate and acidifying compounds such as triethyl citrate perform better in hydrophilic roll-on and cream bases. An aluminium-free deodorant spray is also possible; dissolved active ingredients work best here, whereas powder-form ones such as baking soda can clog the valve and spray head. Propellant and pressurised containers also bring their own requirements for compatibility and testing. Temperature behaviour differs as well: wax sticks can soften in summer, creams can phase-separate in cold conditions. Stability testing in the final packaging is therefore decisive, because container, dosing system and formulation influence one another. Anyone having a deodorant manufactured should therefore only accept the testing once packaging and formulation are final.

Labtree covers this development itself: formulation development, in-house laboratory work, sampling, manufacturability testing and cosmetic production. Anyone who wants to have an aluminium-free deodorant manufactured can develop the deodorant formulation and the claim together, ensuring from the first sampling onwards that active ingredient, format and advertising claim ultimately add up to a coherent product.

How does the deodorant idea become a market-ready formulation?

To turn the deodorant idea into a marketable formula, active ingredient, format and claim must be developed and substantiated together: the active ingredient must remain stable and effective in the chosen format, the format must suit the target group, and the claim must be derivable from the formula documentation, as Regulation (EU) No 655/2013 requires for advertising claims.

Quellen

FAQ

What should you watch out for when wording the "aluminium-free" claim?

Legally, the claim is permissible as long as it is truthful and verifiable. It becomes critical in the wording: anyone portraying aluminium-containing antiperspirants as concerning violates the truthfulness criterion of Regulation (EU) No 655/2013, since aluminium salts remain approved and are assessed as safe within the limits. The claim should therefore describe the omission as a deliberate product decision, not as a safety advantage.

Is aluminium in cosmetics banned?

No. The Scientific Committee on Consumer Safety (SCCS) considers aluminium in cosmetics to be fundamentally safe. Regulation (EU) 2026/909 merely sets maximum levels from 2027, which for non-aerosol deodorants stand at 7.73 percent.

May a crystal deodorant advertise as "aluminium-free"?

No. So-called alum crystals or mineral deodorants consist predominantly of potassium aluminium sulphate and therefore naturally contain aluminium. A free-from claim would be factually false in this case and violates the truthfulness requirements for advertising claims.

What alternatives to aluminium salts exist in deodorants?

Common alternative active ingredients are baking soda, which has a strong antimicrobial effect, and zinc ricinoleate, which binds odour molecules as they form. Acidifying compounds such as triethyl citrate are also used to lower the pH locally and make bacterial growth more difficult.

How do you develop a stable aluminium-free deodorant?

Formulation development must adapt the active ingredient to the chosen format such as stick, roll-on or cream. Laboratory tests on temperature behaviour, sensorics and stability in the final packaging are decisive before the product goes into volume production.

Subscribe to our newsletter

Get more helpful information about cosmetics development.

Subscribe to our newsletter

Get more helpful information about cosmetics development.

Subscribe to our newsletter

Get more helpful information about cosmetics development.

Contact us!

>